Specifications

clear network-domain seed-ip

Chapter 11

Network Domain Commands

260

Examples

The following command clears the Network Domain peer

configuration for peer 192.168.9.254 from the UNIVERGE WL Controller:

Controller# clear network-domain peer 192.168.9.254

success: change accepted.

The following command clears the Network Domain peer configuration for all

peers from the UNIVERGE WL Controller:

Controller# clear network-domain peer all

success: change accepted.

See Also

set network-domain peer on page 262

clear network-domain seed-ip

Removes the specified Network Domain seed from the UNIVERGE WL

Controller configuration. When you enter this command, the Network Domain

TCP connections between the UNIVERGE WL Controller and the specified

Network Domain seed are closed.

Syntax

clear network-domain seed-ip ip-addr

Defaults

None.

Access

Enabled.

Usage

This command has no effect if the UNIVERGE WL Controller is not

configured as part of a Network Domain, or if the UNIVERGE WL Controller is

not configured as a member of a Network Domain using the specified Network

Domain seed.

Examples

The following command removes the Network Domain seed with IP

address 192.168.9.254 from the UNIVERGE WL Controller configuration:

Controller# clear network-domain seed-ip 192.168.9.254

success: change accepted.