Specifications

show mobility-domain
Chapter 10
Mobility Domain Commands
255
Examples To display Mobility Domain status, type the following command:
PROMPT# show mobility-domain
Mobility Domain name: Tokyo (security required)
Member State Type (*:active) Model Version
----------- ---------- -------------- ------- -------
10.8.107.1 STATE_UP SEED* WL5100 6.0.1.0
10.10.10.66 STATE_DOWN MEMBER WL5100 6.0.1.0
Table 28 describes the fields in the display.
See Also
l clear mobility-domain on page 250
l set mobility-domain member on page 251
l set mobility-domain mode member seed-ip on page 252
Table 28. show mobility-domain Output
Field Description
Mobility Domain name Name of the Mobility Domain
Member IP addresses of the seed UNIVERGE WL Controller
and members in the Mobility Domain
State State of the UNIVERGE WL Controller in the
Mobility Domain:
• STATE_UP
• STATE_DOWN
Status Role of the UNIVERGE WL Controller in the
Mobility Domain:
•MEMBER
• SEED