Specifications

show mobility-profile
Chapter 9
AAA Commands
247
show mobility-profile
Displays the named Mobility Profile. If you do not specify a Mobility Profile
name, this command shows all Mobility Profile names and port lists on the
UNIVERGE WL Controller.
Syntax show mobility-profile [name]
Defaults None.
Access Enabled.
Examples The following command displays the Mobility Profile magnolia:
PROMPT# show mobility-profile magnolia
Mobility Profiles
Name Ports
=========================
magnolia AP 2
See Also
l clear mobility-profile on page 195
l set mobility-profile on page 231
name Name of an existing Mobility Profile.