Specifications

show aaa
Chapter 9
AAA Commands
242
Table 26. show aaa Output
Field Description
Default Values RADIUS default values for all parameters.
authport UDP port on the UNIVERGE WL Controller for transmission of
RADIUS authorization and authentication messages. The
default port is 1812.
acctport UDP port on the UNIVERGE WL Controller for transmission of
RADIUS accounting records. The default is port 1813.
timeout Number of seconds the UNIVERGE WL Controller waits for a
RADIUS server to respond before retransmitting. The default is
5 seconds.
acct-timeout Number of seconds the UNIVERGE WL Controller waits for a
RADIUS server to respond to an accounting request before
retransmitting. The default is 5 seconds.
retrans Number of times the UNIVERGE WL Controller retransmits a
message before determining a RADIUS server unresponsive.
The default is 3 times.
deadtime Number of minutes the UNIVERGE WL Controller waits after
determining a RADIUS server is unresponsive before trying to
reconnect with this server. During the dead time, the RADIUS
server is ignored by the UNIVERGE WL Controller. The default
is 0 minutes.
key Shared secret key, or password, used to authenticate to a
RADIUS server. The default is no key (null).
author-pass Password used for authorization to a RADIUS server for MAC
authentication. The client MAC address is sent as the username
and the author-pass string is sent as the password.
Radius Servers Information about active RADIUS servers.
Server Name of each RADIUS server currently active.
Addr IP address of each RADIUS server currently active.
Ports UDP ports that the UNIVERGE WL Controller uses for
authentication messages and for accounting records.
T/o Setting of timeouts on each RADIUS server currently active.