Specifications

set user
Chapter 9
AAA Commands
235
set user
Configures a user profile in the local database on the UNIVERGE WL Controller
for a user with a password.
(To configure a user profile in RADIUS, see the documentation for your RADIUS
server.)
Syntax set user username password [encrypted] string
Defaults None.
Access Enabled.
Usage The show config command shows the encrypted option with this
command, even when you omit the option. The encrypted option appears in the
configuration because UNIVERGE WL Control System automatically encrypts
the password when you create the user (unless you use the encrypted option when
you enter the password).
Although UNIVERGE WL Control System allows you to configure a user
password for the special “last-resort” guest user, the password has no effect.
Last-resort users can never access a UNIVERGE WL Controller in administrative
mode and never require a password.
The only valid username of the form last-resort-* is last-resort-wired. The
last-resort-wired user allows last-resort access on a wired authentication port.
username Username of a user with a password.
encrypted Indicates that the password string you entered is
already in its encrypted form. If you use this option,
UNIVERGE WL Control System does not encrypt
the displayed form of the password string, and
instead displays the string exactly as you entered it. If
you omit this option, UNIVERGE WL Control
System does encrypt the displayed form of the string.
password string Password of up to 38 alphanumeric characters, with
no spaces.