Specifications

set mobility-profile mode
Chapter 9
AAA Commands
234
set mobility-profile mode
Enables or disables the Mobility Profile feature on the UNIVERGE WL
Controller.
Syntax set mobility-profile mode {enable | disable}
Defaults The Mobility Profile feature is disabled by default.
Access Enabled.
Examples To enable the use of the Mobility Profile feature, type the following
command:
PROMPT# set mobility-profile mode enable
success: change accepted.
See Also
l clear mobility-profile on page 195
l set mobility-profile on page 231
l show mobility-profile on page 247
Caution! When the Mobility Profile feature is enabled, a user is denied
access if assigned a Mobility-Profile attribute in the local UNIVERGE WL
Controller database or RADIUS server if no Mobility Profile of that name exists
on the UNIVERGE WL Controller.
enable Enables the use of the Mobility Profile feature on the UNIVERGE
WL Controller.
disable Specifies that all Mobility Profile attributes are ignored by the
UNIVERGE WL Controller.