Specifications

set mobility-profile
Chapter 9
AAA Commands
232
Defaults No default Mobility Profile exists on the UNIVERGE WL Controller.
If you do not assign Mobility Profile attributes, all users have access through all
ports, unless denied access by other AAA servers or by access control lists
(ACLs).
Access Enabled.
Usage To assign a Mobility Profile to a user or group, specify it as an
authorization attribute in one of the following commands:
l set user attr mobility-profile name
l set usergroup attr mobility-profile name
l set mac-user attr mobility-profile name
l set mac-usergroup attr mobility-profile name
To enable the use of the Mobility Profile feature on the UNIVERGE WL
Controller, use the set mobility-profile mode command.
To change the ports in a profile, use set mobility-profile again with the updated
port list.
all Allows any user to whom this profile is assigned to access
all UNIVERGE WL Access Points on the UNIVERGE WL
Controller.
ap-num List of UNIVERGE WL Access Points connections through
which any user assigned this profile is allowed access. The
same UNIVERGE WL Access Points can be used in
multiple Mobility Profile port lists.
Caution! When the Mobility Profile feature is enabled, a user is denied
access if assigned a Mobility-Profile attribute in the local UNIVERGE WL
Controller database or RADIUS server when no Mobility Profile of that name
exists on the UNIVERGE WL Controller.