Specifications

set mac-user attr
Chapter 9
AAA Commands
224
filter-id
(network access
mode only)
Security access control
list (ACL), to permit or
deny traffic received
(input) or sent (output)
by the UNIVERGE WL
Controller.
(For more information
about security ACLs,
see Chapter 14,
“Security ACL
Commands,” on
page 453.)
Name of an existing security ACL, up to 32
alphanumeric characters, with no tabs or
spaces.
• Use acl-name.in to filter traffic that
enters the UNIVERGE WL Controller
from the network via a network port.
•Use acl-name.out to filter traffic sent
from the UNIVERGE WL Controller
from the network via a network port.
Note: If the Filter-Id value returned through
the authentication and authorization process
does not match the name of a committed
security ACL in the UNIVERGE WL
Controller, the user fails authorization and is
unable to authenticate.
idle-timeout This option is not implemented in the current UNIVERGE WL
Control System version.
mobility-profile
(network access
mode only)
Mobility Profile
attribute for the user.
(For more information,
see set mobility-profile
on page 231.)
Note: Mobility-Profile
is a UNIVERGE WL
Control System
vendor-specific
attribute (VSA). The
vendor ID is 14525, and
the vendor type is 2.
Name of an existing Mobility Profile, which
can be up to 32 alphanumeric characters,
with no tabs or spaces.
Note: If the Mobility Profile feature is
enabled, and a user is assigned the name of a
Mobility Profile that does not exist on the
UNIVERGE WL Controller, the user is
denied access.
Table 25. Authentication Attributes for Local Users
Attribute Description Valid Value(s)