Specifications

set authentication console
Chapter 9
AAA Commands
208
Access Enabled..
Usage You can configure different authentication methods for different groups
of users. (For details, see “User Globs, MAC Address Globs, and VLAN Globs”
on page 9.)
If you specify multiple authentication methods in the set authentication console
command, UNIVERGE WL Control System applies them in the order in which
they appear in the command, with these results:
l If the first method responds with pass or fail, the evaluation is final.
l If the first method does not respond, UNIVERGE WL Control System tries
the second method, and so on.
l However, if local appears first, followed by a RADIUS server group,
UNIVERGE WL Control System ignores any failed searches in the local
UNIVERGE WL Controller database and sends an authentication request to
the RADIUS server group.
Examples To set the console port so that it does not enforce username-password
authentication for administrators, type the following command:
PROMPT# set authentication console * none
success: change accepted.
See Also
l clear authentication console on page 187
l set authentication admin on page 203
l set authentication dot1x on page 209
l set authentication mac on page 213
l set authentication web on page 215
l show aaa on page 240
Note. The syntax descriptions for the set authentication commands are
separated for clarity. However, the options and behavior for the set
authentication console command are the same as in previous releases.