Specifications

set accounting {dot1x | mac | web | last-resort}
Chapter 9
AAA Commands
202
Syntax set accounting {dot1x | mac | web | last-resort} {ssid ssid-name}
{user-glob | mac-addr-glob} {start-stop | stop-only}
method1 [method2] [method3] [method4]
dot1x Users with network access through the UNIVERGE WL
Controller who are authenticated by 802.1X.
mac Users with network access through the UNIVERGE WL
Controller who are authenticated by MAC authentication
web Users with network access through the UNIVERGE WL
Controller who are authenticated by Web Authentication
ssid ssid-name SSID name to which this accounting rule applies. To apply
the rule to all SSIDs, type any.
user-glob Single user or set of users with administrative access or
network access.
Specify a username, use the double-asterisk wildcard
character (**) to specify all usernames, or use the
single-asterisk wildcard character (*) to specify a set of
usernames up to or following the first delimiter character—
either an at sign (@) or a period (.). (For details, see “User
Globs” on page 9.)
Note: This option does not apply if mac or last-resort is
specified. For mac, specify a mac-addr-glob.
mac-addr-glob A single user or set of users with access via a MAC address.
Specify a MAC address, or use the wildcard (*) character to
specify a set of MAC addresses. (For details, see “MAC
Address Globs” on page 10.)
This option applies only when mac is specified.
start-stop Sends accounting records at the start and end of a network
session.