Specifications

set accounting {dot1x | mac | web | last-resort}
Chapter 9
AAA Commands
201
Defaults Accounting is disabled for all users by default.
Access Enabled.
Usage For network users with start-stop accounting whose records are sent to a
RADIUS server, UNIVERGE WL Control System sends interim updates to the
RADIUS server when the user roams.
Examples The following command issues start-and-stop accounting records at the
local UNIVERGE WL Controller database for administrator Natasha, when she
accesses the UNIVERGE WL Controller using Telnet or Web View:
PROMPT# set accounting admin Natasha start-stop local
success: change accepted.
See Also
l clear accounting on page 185
l show accounting statistics on page 243
set accounting {dot1x | mac | web | last-resort}
Sets up accounting services for specified wireless users with network access, and
defines the accounting records and where they are sent.
method1
method2
method3
method4
At least one of up to four methods that UNIVERGE WL
Control System uses to process accounting records. Specify
one or more of the following methods in priority order. If
the first method does not succeed, UNIVERGE WL Control
System tries the second method, and so on.
A method can be one of the following:
• local—Stores accounting records in the local database
on the UNIVERGE WL Controller. When the local
accounting storage space is full, UNIVERGE WL
Control System overwrites older records with new ones.
• server-group-name—Stores accounting records on one
or more Remote Authentication Dial-In User Service
(RADIUS) servers. You can also enter the names of
existing RADIUS server groups as methods.