Specifications

set snmp notify target
Chapter 8
IP Services Commands
138
target-num ID for the target. This ID is local to the
UNIVERGE WL Controller and does not
need to correspond to a value on the target
itself. You can specify a number from 1 to
10.
ip-addr[:udp-port-number] IP address of the server. You also can
specify the UDP port number to send
notifications to.
username USM username. This option is applicable
only when the SNMP version is usm.
If the user will send informs rather than
traps, you also must specify the
snmp-engine-id of the target.
snmp-engine-id
{ip | hex hex-string}
SNMP engine ID of the target. Specify ip if
the target SNMP engine ID is based on its IP
address. If the target’s SNMP engine ID is a
hexadecimal value, use hex hex-string to
specify the value.
profile profile-name Notification profile that this SNMP user will
use to specify the notification types to send
or drop.
security {unsecured |
authenticated | encrypted}
Specifies the security level, and is
applicable only when the SNMP version is
usm:
• unsecured—Message exchanges are not
authenticated, nor are they encrypted.
This is the default.
• authenticated—Message exchanges are
authenticated, but are not encrypted.
• encrypted—Message exchanges are
authenticated and encrypted.