Specifications

set snmp community
Chapter 8
IP Services Commands
131
Usage SNMP community strings are passed as clear text in SNMPv1 and
SNMPv2c. UNIVERGE WL Control System recommends that you use strings
that cannot easily be guessed by unauthorized users. For example, do not use the
well-known strings public and private.
If you are using SNMPv3, you can configure SNMPv3 users to use authentication
and to encrypt SNMP data.
Examples The following command configures the read-write community
good_community:
PROMPT# set snmp community read-write good_community
success: change accepted.
The following command configures community string switchmgr1 with access
level notify-read-write:
PROMPT# set snmp community name switchmgr1 notify-read-write
success: change accepted.
See Also
l clear snmp community on page 103
l set ip snmp server on page 122
l set snmp notify target on page 137
l set snmp notify profile on page 132
l set snmp protocol on page 143
l set snmp security on page 144
l set snmp usm on page 146
l show snmp community on page 173