Specifications

set snmp community
Chapter 8
IP Services Commands
130
set snmp community
Configures a community string for SNMPv1 or SNMPv2c.
Syntax set snmp community name comm-string
access {read-only | read-notify | notify-only | read-write | notify-read-write}
Defaults None.
Access Enabled.
Note. For SNMPv3, use the set snmp usm command to configure an SNMPv3
user. SNMPv3 does not use community strings.
comm-string Name of the SNMP community. Specify between 1 and
32 alphanumeric characters, with no spaces.
read-only Allows an SNMP management application using the
string to get (read) object values on the UNIVERGE
WL Controller but not to set (write) them.
read-notify Allows an SNMP management application using the
string to get object values on the UNIVERGE WL
Controller but not to set them. The UNIVERGE WL
Controller can use the string to send notifications.
notify-only Allows the UNIVERGE WL Controller to use the
string to send notifications.
read-write Allows an SNMP management application using the
string to get and set object values on the UNIVERGE
WL Controller.
notify-read-write Allows an SNMP management application using the
string to get and set object values on the UNIVERGE
WL Controller. The UNIVERGE WL Controller also
can use the string to send notifications.