Specifications

set ip https server

Chapter 8

IP Services Commands

119

success: change accepted.

PROMPT# set ip dns server 10.10.30.69/24 secondary

success: change accepted.

See Also

l clear ip dns domain on page 99

l clear ip dns server on page 99

l set ip dns on page 116

l set ip dns domain on page 117

l show ip dns on page 164

set ip https server

Enables the HTTPS server on a UNIVERGE WL Controller. The HTTPS server

is required for WebView access to the UNIVERGE WL Controller.

Syntax

set ip https server {enable | disable}

Defaults

The HTTPS server is enabled by default.

Access

Enabled.

Examples

The following command disables the HTTPS server on a UNIVERGE

WL Controller:

PROMPT# set ip https server disable

success: change accepted.