Specifications

set ip dns domain
Chapter 8
IP Services Commands
117
See Also
l clear ip dns domain on page 99
l clear ip dns server on page 99
l set ip dns domain on page 117
l set ip dns server on page 118
l show ip dns on page 164
set ip dns domain
Configures a default domain name for DNS queries. The UNIVERGE WL
Controller appends the default domain name to domain names or hostnames you
enter in commands.
Syntax set ip dns domain name
Defaults None.
Access Enabled.
Usage To override the default domain name when entering a hostname in a CLI
command, enter a period at the end of the hostname. For example, if the default
domain name is example.com, enter chris. if the fully qualified hostname is chris
and not chris.example.com.
Aliases take precedence over DNS. When you enter a hostname, UNIVERGE WL
Control System checks for an alias with that name first, before using DNS to
resolve the name.
Examples The following command configures the default domain name
example.com:
PROMPT# set ip dns domain example.com
Domain name changed
name Domain name of between 1 and 64 alphanumeric characters with no
spaces (for example, example.org).