Specifications

set ip dns
Chapter 8
IP Services Commands
116
Syntax set ip alias name ip-addr
Defaults None.
Access Enabled.
Examples The following command configures the alias HR1 for IP address
192.168.1.2:
PROMPT# set ip alias HR1 192.168.1.2
success: change accepted.
See Also
l clear ip alias on page 98
l show ip alias on page 163
set ip dns
Enables or disables DNS on a UNIVERGE WL Controller.
Syntax set ip dns {enable | disable}
Defaults DNS is disabled by default.
Access Enabled.
Examples The following command enables DNS on a UNIVERGE WL
Controller:
PROMPT# set ip dns enable
Start DNS Client
name String of up to 32 alphanumeric characters, with no spaces.
ip-addr IP address in dotted decimal notation.
enable Enables DNS.
disable Disables DNS.