Specifications

clear ip telnet
Chapter 8
IP Services Commands
101
Examples The following command removes the route to destination 10.10.10.68/
24 through router 10.10.10.1:
PROMPT# clear ip route 10.10.10.68/24 10.10.10.1
success: change accepted.
See Also
l set ip route on page 120
l show ip route on page 167
clear ip telnet
Resets the Telnet server TCP port number to its default value. A UNIVERGE WL
Controller listens for Telnet management traffic on the Telnet server port.
Syntax clear ip telnet
Defaults The default Telnet port number is 23.
Access Enabled.
Examples The following command resets the TCP port number for Telnet
management traffic to its default:
PROMPT# clear ip telnet
success: change accepted.
See Also
l set ip https server on page 119
l set ip telnet on page 125
l set ip telnet server on page 126
l show ip https on page 165
l show ip telnet on page 169