Use and Care Manual

7
Fig. 1
Fig. 2
Fig. 3 Fig. 4
ASSEMBLING THE VACUUM
NOTE: Always unplug the vacuum
before assembling or removing
accessories.
1. Insert the telescoping wand into the
top of the main unit. Ensure the button
on the wand locks into place (Fig. 1).
2. Attach the tool caddy to the
telescoping wand, then insert the
crevice tool into the caddy (Fig. 2).
3. Attach the floor nozzle to the neck
of the dust cup ensuring the button
on the nozzle neck locks into place
(Fig. 3).
4. Push the button on the telescopic
wand forward to shorten or lengthen
the wand to the desired length
(Fig. 4).