Use and Care Manual

11
REPLACING THE FOAM FILTERS
Fig. 2
Fig. 3 Fig. 4
Fig. 1
Fig. 5 Fig. 6
Pre-Motor Filter
1. Push the dust cup latch to remove the
dust cup from the vacuum (Fig. 1).
2. Remove the gray foam filter from the
frame located at the base of the main
body (Fig. 2).
3. Shake or tap the filter to remove
excess dust or replace with a new filter
(do not wash or reuse).
4. Replace the dust cup onto the vacuum
(Fig. 4).
High Flow Dust Bin Filter
1. Push the dust cup latch to remove the
dust cup from the vacuum (Fig. 1).
2. Remove the white High Flow filter
by grasping the top of the filter and
pulling straight up (Fig. 3).
3. Shake or tap the filter to remove
excess dust or replace with a new filter
(do not wash or reuse).
4. Replace the dust cup onto the vacuum
(Fig. 4).
Pre-Filter
1. Push the dust cup latch to remove the
dust cup from the vacuum (Fig. 1).
2. Remove the cyclonic filter holder
(Fig. 5).
3. Remove the white High Flow filter
by grasping the top of the filter and
pulling straight up (Fig. 3).
4. Remove the black pre-filter from the
inside of the cyclonic filter holder
(Fig. 6).
5. Shake or tap the filter to remove
excess dust or replace with a new filter
(do not wash or reuse).
6. Replace the pre-filter and the High
Flow filter in the cyclonic filter holder.
7. Replace the dust cup onto the vacuum
(Fig. 4).
WARNING: Do not put filters in the
dishwasher or clothes washing machine.