Use and Care Manual

CLEANING THE DUST CUP

1. Push the dust cup latch to remove the

dust cup from the vacuum (Fig. 1).

2. Remove the floor nozzle from the dust

cup by pressing the red button on

the nozzle neck and pulling the floor

nozzle out of the dust cup (Fig. 2).

3. Remove the cyclonic filter holder

(Fig. 3).

4. Shake out remaining dust and rinse

with water. Make sure all pieces are

completely dry before replacing in

thevacuum.

5. Replace the cyclonic filter holder.

6. Replace the dust cup onto the vacuum

(Fig. 4). Then replace the floor nozzle

and resume vacuuming (Fig. 5).

Fig. 1

Fig. 3

Fig. 2

Fig. 4

Fig. 5

REPLACING THE HEPA MEDIA FILTER

Fig. 1

Fig. 2

WARNING: Always unplug the vacuum from the electrical

outlet before removing the filters.

1. Remove the filter cover by pushing in on the tab and

rotating the cover out (Fig. 1).

2. Remove the filter by grasping the filter and pulling the

filter straight out of the machine (Fig. 2).

3. Replace with a new filter (do not wash and reuse).

4. Replace the filter cover by inserting the two tabs in first

then snapping the cover in place with the large tab.