Warranty

5
Attaching the Handle to the Vacuum
NOTE: Do not plug in the vacuum until it is
completely assembled.
The vacuum cleaner handle is packed as a
separate component that requires assembly.
• Release the handle bracket from the handle tube
by removing the two screws (Fig. 1).
• Place handle onto the handle tube, aligning holes
with pegs (Fig. 2).
• Place the handle bracket back into
position (Fig. 3).
• Secure with two screws removed in step 1.
Fig. 1
Fig. 2
AsseMbLIng tHe VACUUM
Fig. 3