Warranty

10
Replacing the Belt
CAUTION: To reduce the risk of injury
from moving parts, unplug the vacuum
before servicing.
• Turn the unit over and remove the bottom
plate (see “Removing and Reinstalling the
Bottom Plate” on pg. 9).
• Remove the brushroll and the worn or
broken belt from the brushroll pulley and
the motor drive shaft (Fig. 1).
• Loop the new belt around the
motor drive shaft and the brushroll
(Fig. 2).
• Reinstall the brushroll back into the
housing. Turn the brushroll by hand,
making sure the belt is not twisted
and all rotating parts move smoothly
(Fig. 3).
• Reinstall the bottom plate (see
“Removing and Reinstalling the
Bottom Plate” on pg. 9).
NOTE: To ensure maximum cleaning
efficiency, the belt should be checked
regularly to be sure it is in good condition.
Check to see if the belt is stretched,
cracked, or if excessive slipping is
occurring. Replace if needed.
Fig. 1
Fig. 2
Fig. 3
MAIntenAnCe AnD CARe