Warranty

9
MAIntenAnCe AnD CARe
Removing and Reinstalling the
Bottom Plate
CAUTION: To reduce the risk of injury
from moving parts, unplug the vacuum
before servicing.
To Remove Bottom Plate:
• After unplugging the power cord, turn
the vacuum cleaner over, exposing the
underside.
• Press the two holding tabs towards the
back of the nozzle. (Fig. 1) releasing the
bottom plate. Remove the bottom plate.
To Install Bottom Plate:
• Make sure bottom plate hinge tabs are in
place before setting the plate (Fig. 2).
• Press the bottom plate into position until
it “clicks” on both sides.
Fig. 1
Fig. 2