Owner's Manual

12
Troubleshooting
PROBLEM SOLVING GUIDE
PROBLEM CHECK POINT POSSIBLE SOLUTION
Vacuum won’t
turn on
• Power cord not firmly
plugged in
• Plug unit in firmly
• Blown fuse or tripped
breaker
• Check house fuse or
breaker. Replace fuse /
reset breaker
• Needs service • Take to an authorized
service center
Vacuum won’t pick
up or low suction
• Vacuum bag full • Install new bag
• Clogged filter • Install new filter
• Hose clogged • Remove obstacle
Dust escaping
from vacuum
• Bag compartment cover
not installed properly
• Reinsert the cover and
secure latch
• Filter not installed
correctly
• Review filter installation
(page 12)
• Vacuum bag not installed
correctly
• Review bag installation
(page 11)
Any other service should be performed by an AuthorizedSimplicity Vacuum
Retailer. To locate your nearest Authorized Retailer, visit our website at
SimplicityVac.com or call 888-974-6759.
Key Replacement Parts
• Genuine package of 6 paper bags and 1 filter Part # SS-6
For Best Performance
• Keep machine and all accessories clean and in good operating condition.
• Change vacuum bag and filter as recommended to maintain optimum
cleaningefficiency.
• Always use genuine bags, filters and parts, as use of other products may result in
poor cleaning or filtration performance. Simplicity filtration products are designed
for maximum performance.
• Have machine checked periodically by the retailer where you purchased your
Simplicityvacuum.
• Store machine carefully in dry area.
• For optimum cleaning performance and safety, follow your owner’s manual.