Specifications

81
Valve Clearance
Valve Clearance (Cold) * ±.002 (.05 mm)
Engine Model Intake Valve Exhaust Valve
LAV35,50
LEV80-120, LV195
TVS75-120
ECV & TNT100-120
H30-35 & HS40-50
.006"
(.004" - .008")
.15 mm
(.10 - .20 mm)
.006"
(.004" - .008")
.15 mm
(.10 - .20 mm)
VLV40-6.75 .006"* (.15 mm) .006"* (.15 mm)
TVT (V-Twin), VTX .004 (.10 mm) .004 (.10 mm)
TVM125-220
V & VH50-70
H & HH50-70
HM70-100 & HHM80
LH318 - 358
.010"* (.25 mm) .010"* (.25 mm)
OHSK80-130, OHM, OVM120
OVXL120 & OHV11-17,
OV318, 358, OV358, OV490
.004"* (.10 mm) .004"* (.10 mm)
HH100-120 .010"* (.25 mm) .020"* (.5 mm)
OH120-180 .005"* (.13 mm) .010"* (.25 mm)
OVRM40-6.75, OV195, OH195
OHH/OHSK50-70
.004"* (.10 mm) .004"* (.10 mm)
HSK60-70
HMSK80-100
.006"* (.15 mm) .006"* (.15 mm)
Valve clearance is checked with engine cold and piston
at T.D.C. of compression stroke.
NOTE
If the valve spring has dampening coils, it should be
installed with the dampening coils away from the valve
cap and retainers (opposite the keepers) or towards
stationary surface.
DAMPENING COILS
LOCATED CLOSER
TOGETHER
THIS END TOWARD
STATIONARY SURFACE
138
www.mymowerparts.com
For Discount Tecumseh Engine Parts Call 606-678-9623 or 606-561-4983