Specifications

63
Standard Wiring Harness Connector
Adapters
In an effort to standardize all of the connectors on our
wiring harnesses, we have created new connectors to
match O.E.M. standard wiring. No matter what size of
alternator our large frame engines are equipped with
the connector and will have six wire positions with the
wires going into assigned positions. Connector part
#611296 is set up for engines with a 3/5 split alternator.
It will mate with the engine harness and will have the
appropriate connectors for the equipment.
The connector part #611297 is set up for engines with
a 16 Amp charging system.
A basic six-pin connector part #611294 has been
established for any remaining systems and includes all
of the wires. The necessary wires for the equipment will
have to be spliced into the O.E.M. wiring.
On older engines which use (2) two-pin connectors, an
adapter exists to convert to a six-pin connector, part
#37642.
For small and medium frame engines, a standard four-
pin connector has been established, part #611293.
Also spliced into the O.E.M. wiring, these will be
especially helpful in the re-powering of units that may
have had a different original engine as the connectors
fit the standards used by most O.E.M.'s.
611296
37642
611293
611297
611294
www.mymowerparts.com
For Discount Tecumseh Engine Parts Call 606-678-9623 or 606-561-4983