Specifications

27
-
6
5
4
32
1
+ −
+
+−
Typical 16 Amp Regulated Alternator Wiring Diagram
With Charge Indicator Light
6-Pole Switch − Briggs & Stratton Part# 692318
KEY SWITCH TEST
SWITCH POSITION CONTINUITY
1. OFF *1 + 3 + 6
2. RUN 2 + 5 + 6
3. START 2 + 4 + 5
*Terminal 1 Grounded Internally
To Key Switch Case
TERMINAL NO. FUNCTION
1 Ground (Used only with insulated panel)
2 To Carburetor Solenoid
3 To Stop Switch Terminal On Engine
4 To Solenoid (Tab terminal)
5 To Battery (Battery terminal on solenoid)
6 To Alternator (DC Output)
ALTERNATOR
BLUE WIRE
ANTI-AFTERFIRE
SOLENOID
STOP
SWITCH
TERMINAL
SOLENOID TAB
TERMINAL
TO STARTER
TERMINAL
SOLENOID
TO BATTERY
TERMINAL
STARTER MOTOR
12 VOLT BATTERY
HEADLIGHTS
AMMETER
HEADLIGHT
SWITCH
AC OUTPUT
WIRE
CHARGE
INDICATOR
LIGHT
REGULATOR/
RECTIFIER
AMMETER
(OPTIONAL)
RED WIRE
DC OUTPUT
RAISED RIB
With ammeter shown in optional position, note that − and + symbols are reversed. The + symbol must always be
connected to the alternator side.
YELLOW
RED
RED
RED