Specifications

19
4. Original engine equipped with Tri-Circuit alternator. Replacement engine equipped with 5, 9, 10 or 16
amp regulated system.
Modify 692306 harness supplied with replacement engine by splicing into charging circuit wire and lighting
circuit wire in equipment harness. See Fig. 4
NOTE: THE DIODES MUST BE REMOVED FROM THE 692306 HARNESS BEING CONNECTED TO THE
EQUIPMENT HARNESS.
RED WIRE
RED CONNECTOR
EQUIPMENT
HARNESS
692306
HARNESS - FEMALE
SPLICE
OUTPUT CONNECTOR
FROM REGULATOR - MALE
LIGHTING CIRCUIT WIRE
CHARGING CIRCUIT WIRE
Fig. 4
3. Original engine equipped with Dual Circuit alternator. Replacement engine equipped with 5, 9, 10 or 16
amp regulated system.
Modify 692306 harness supplied with replacement engine by splicing in 399916 connector assembly. Connect
to equipment harness. See Fig. 3
NOTE: THE DIODES MUST BE REMOVED FROM THE EQUIPMENT HARNESS.
398661 EQUIPMENT
HARNESS - FEMALE
RIB
RIB
END PROFILE
MALE FEMALE
692306
HARNESS - FEMALE
RED WIRE
RED CONNECTOR
RED WIRE BLACK WIRE
SPLICE
OUTPUT CONNECTOR
FROM REGULATOR - MALE
399916 CONNECTOR
ASSEMBLY - MALE
Fig. 3