Specifications

26 PHOENIX CONTACT
Bro_Safety_Info_DE_Rev01.indd Abs2:22-Abs2:23Bro_Safety_Info_DE_Rev01.indd Abs2:22-Abs2:23
Interbus Safety – Safe I/O
modules for the control cabinet
and the field
The inputs and the outputs of the safe I/O
modules with IP20 and IP67 protection,
which have been integrated in the application
are parameterized according to the
application. Here, you can opt for single or
two-channel signals, two test cycles,
diagnostics for short and cross circuit, an
equivalent or antivalent signal image and
currents up to 2 A for the outputs. In this
manner, all the single or two-channel
standard sensors and actuators can be
integrated into the safe fieldbus system. The
safe segment disabling is used to switch off
the following output components safely. In
combination with the safe Inline module
IB IL 400 SAFE 2, 400 V circuits can also be
switched off safely.
Order No. 2737520
• Rugged Line safety module with IP67
protection
• Four safety-oriented two-channel inputs and
outputs each or eight safety-oriented single-
channel inputs and outputs each
• Two pulsed outputs for supply to the UT1 and
UT2 inputs
• Max. 2 A per output (observe the derating)
• Max. safety category 4 in accordance with
EN 954-1, PL e in accordance with
EN ISO 13849-1 and SIL 3 in accordance with
IEC 61508 (EN IEC 62061)
IBS RL 24 SDIO 4/4/8-LK
Our safe I/O modules can be used in all
standard safety applications such as the
emergency stop equipment, light curtains
and scanner applications as well as in
safety circuits for the safe switching of
contactors, motors, valves and ohmic and
inductive loads.
IB I
Order No. 2
• Inline
• Four safe
or eight safety-orie
each
• Two
UT2
• Max. safety
EN 954
EN ISO
IEC 61508 (EN IEC
IB IL 24 SDIO
Order No
• Inline safety te
• Four safety-oriented two-channel inputs
outputs
channel
• Two
UT2 inpu
• Max. 2 A per output (obser
• One sa
max.
• Max. safety category 4
EN 95
EN I
IEC 61
EN_DE_Safety_Rev.01.fm Seite 10 Freitag, 30. Mai 2008 1:22 13
Textfarbe Schmuck 45,0° 240,0 LPI