Specifications

Discovering your WSTKs via Ethernet
In order to discover your WSTKs via the Ethernet connection you must first configure Simplicity Studio to search for and discover your
devices. You can do this by clicking on the arrow at the top of the Adapters View in the Simplicity Perspective and selecting [Configure
Device Scanning].
Figure 2.9. Configure Device Scanning
Figure 2.10. InSight Adapters
The Configuration interface located in [Preferences > Device Manger > InSight Adapters] allows you to configure the scanning that
Simplicity Studio will do to discover adapters on the network. In the case above, there is a WSTK connected with an IP address of
10.4.178.121. In order to scan for all devices on that subnet of the test network, set the subnet IP address at 10.4.178.0 with a mask of
255.255.255.0. This will scan for all WSTKs on the subnet 10.4.178 and should return my device.
Quick Start Guide
Running Simplicity Studio for the First Time
silabs.com | Smart. Connected. Energy-friendly. Rev. 0.2 | 7