Specifications

Configuring Your WSTK for an Ethernet Connection
You can also connect to your WSTK boards to be connect and discovered via Ethernet. You can configure the IP address of your de-
vice through the Simplicity Studio Home Screen by clicking on the arrow to the right of your device and selecting [Configure Adapter].
Figure 2.7. Select Configure Adapter
The Configure Adapter dialog window will allow you to set the J-Link Speed, Addressing Mode, and IP configuration for your WSTK
board.
Figure 2.8. Configure Adapter Dialog Window
Quick Start Guide
Running Simplicity Studio for the First Time
silabs.com | Smart. Connected. Energy-friendly. Rev. 0.2 | 6