Specifications

Click the [Next] button. In the next screen you should see all of the sample applications available for your part. Choose the [simple_rtx]
sample and click [Next].
Figure 4.3. Select Simple RTx Sample Application
The next screen will allow you to select a name for your application. Choose the name you want and select [Next] again. The next
screen allows you to configure your Build Configurations for this project. For the Simple Rx/Tx sample you have the option of building
with IAR (if you have IAR installed) or GCC. Select all the build configuration options you want and click [Finish].
Figure 4.4. Build Configurations
The Simple Rx/Tx sample is developed in the Development Perspective. Clicking on the [Finish] button will automatically launch the
Development Perspective in which you can edit and build your application. For more information on how to build, load, and interact with
your application, please see the “Building Your Sample Application” section.
For more information on how to use the Simple Rx/Tx sample application, please see the readme.txt included with the sample and
available in your generated application.
All sample applications include a readme.txt file that explains the sample and its operation.
Quick Start Guide
The Simple RTx Sample Application
silabs.com | Smart. Connected. Energy-friendly. Rev. 0.2 | 22