Specifications

1. Getting Started
Hardware
• BRD4001A - Wireless Starter Kit Mainboard
• One set of the following:
• BRD4502A - EZR32LG 330 Direct Tie WSTK Radio Board; Si4460; 868 MHz +13 dBm
• BRD4502B – EZR32LG 330 Switched WSTK Radio Board; Si4455; 434 MHz +20 dBm
• BRD4502C - EZR32WG 330 Direct Tie WSTK Radio Board; Si4460; 868 MHz +13 dBm
• BRD4502D – EZR32WG 330 Switched WSTK Radio Board; Si4455; 434 MHz +20 dBm
• BRD4503A - EZR32LG 330 Switched WSTK Radio Board; Si4463; 915 MHz +20 dBm
• BRD4503B - EZR32WG 330 Switched WSTK Radio Board; Si4463; 915 MHz +20 dBm
• BRD4505B - EZR32WG 330 Switched WSTK Radio Board; Si4463; 490 MHz +20 dBm
Software:
• Simplicity Studio 3.0 + EFM and Wireless Packages.
• WSTK Firmware Version 2.4 or later. (Update available within Simplicity Studio through the Kit Manager)
Software Dependencies
• Simplicity Studio v3
Installing All Required Software
Install all of the above listed software. All of the EZR32 development kit software and prerequisite software must be installed on your
machine for the development kit software to work correctly. The order in which the software is installed is not important but you will want
to make sure that you have it all installed before you launch Simplicity Studio and begin working on your first project.
Quick Start Guide
Getting Started
silabs.com | Smart. Connected. Energy-friendly. Rev. 0.2 | 1