Specifications

Running Console for Command Line Interface to Nodetest Application
Once the Nodetest application is loaded onto the EZR32LG/WG, you must first [Connect] to the device through the Adapters view, and
then you can interact with the nodetest application using the Command Line Interface within the Console view in Simplicity Studio.
Right-click on the [Adapter] in the Adapter’s View and select [Connect] and then [Launch Console].
Figure 3.4. Launch Console
The Console View will give you a CLI interface in Simplicity Studio’s Network Analyzer Perspective so that you can interact directly with
the nodetest application.
Figure 3.5. Nodetest CLI: Help
Typing help on the command line gives you the complete list of commands available in the nodetest application.
Quick Start Guide
RF Evaluation Using Nodetest
silabs.com | Smart. Connected. Energy-friendly. Rev. 0.2 | 13