Specifications

Compare Units
6-45 Event Manager (EV)
Bits 3–2 CMP8ACT1–0. Action on compare output pin 8, CMP8.
00 Forced low
01 Active low
10 Active high
11 Forced high
Bits 1–0 CMP7ACT1–0. Action on compare output pin 7, CMP7.
00 Forced low
01 Active low
10 Active high
11 Forced high
6.4.2 Compare Unit Interrupts
There is a maskable interrupt flag in EVIFRA and EVIFRC for each compare
unit. The interrupt flag of a compare unit is set one clock cycle after a compare
match, if compare operation is enabled. A peripheral interrupt request is gen-
erated by the flag if it is unmasked.
6.4.3 Compare Unit Reset
When any reset event occurs, all register bits associated with the compare
units are reset to 0 and all compare output pins are put in the high-impedance
state.