Operator`s manual

Operation
Simplicity Australia Page 3.32 Version 1.0
Software and Hardware Versions
The above screen is displayed for 60 seconds each time the Seeder
Console is switched on using the ‘power’ switch. It is not necessary
to have this information displayed for the full 60 seconds if not
required. When the screen is displayed simply push the ‘enter’
button to move into the working screen.
The software and hardware version numbers on this screen will
change in the event of a software or hardware upgrade and it is
important that this information is recorded in this Operator’s Manual
to keep track of any changes.
When talking to your Simplicity Australia Dealer regarding the
operation of the E15 Seeder Console always have this Operator’s
Manual and the E15 Seeder Console Manual with you. The version
numbers may be required to assist with any concern.
Below is space provided to keep a record of any software and
hardware upgrades.
Type of Upgrade
(Software or Hardware)
Version Date Operator’s Manual Upgraded