Operator`s manual

Operation
Simplicity Australia Page 3.28 Version 1.0
Seeding Kit Configurations and Terminology
There are a number of different configurations and combinations for Seeding
Kit set up.
Single Shoot – Single shoot seeding kits are used when the product is
delivered to one sowing boot only.
Double Shoot – Double shoot seeding kits are used when two products are
kept separate and placed in two separate zones. Double shoot requires the
use of two separate seeding kits.
Triple Shoot – Triple shoot seeding kits are used when three products are
kept separate and placed in three separate zones. Triple shoot requires the
use of three separate seeding kits.
Direct Feed – Direct feed is where the metered product from the primary
line is fed directly into a 63mm secondary uptube.
Small Seed Induction – With the use of induction tubes small seeds can be
blended with the main system product at the primary divider outlets. When
used in conjunction with a small seeds box option, small seeds such as canola
can be blended and sown through the same boot as the fertiliser.
When fitting genuine Simplicity Australia seeding kits it is important to follow
some simple guidelines. Your preferred Simplicity Australia Dealer has been
trained in all aspects of seeding kit fitment and will be able to assist with the
correct components and expertise with seeding kit layout for the most
efficient and even distribution of the product
Double Shoot Seeding
Kits fitted to Simplicity
Allrounder
culti
vators.