Product Manual

47
* Actual sustained equipment horsepower will likely be
lower due to operating limitations and environmental
factors.
**Engine Power Rating Information
The gross power rating for individual gas engine mod-
els is labeled in accordance with SAE (Society of Auto-
motive Engineers) code J1940 (Small Engine Power &
Torque Rating Procedure), and rating performance has
been obtained and corrected in accordance with SAE
J1995 (Revision 2002-05). Torque values are derived
at 3060 RPM; horsepower values are derived at 3600
RPM. Actual gross engine power will be lower and
is affected by, among other things, ambient operat-
ing conditions and engine-to-engine variability. Given
both the wide array of products on which engines are
placed and the variety of environmental issues ap-
plicable to operating the equipment, the gas engine
will not develop the rated gross power when used in
a given piece of power equipment (actual “on-site” or
net power). This difference is due to a variety of factors
including, but not limited to, accessories (air cleaner,
exhaust, charging, cooling, carburetor, fuel pump, etc.),
application limitations, ambient operating conditions
(temperature, humidity, altitude), and engine-to-engine
variability. Due to manufacturing and capacity limita-
tions, Briggs & Stratton may substitute an engine of
higher rated power for this Series engine.
Maximum Weight 750 lbs (340 kg)
on Axle
DIMENSIONS
Overall Length 81” (208 cm)
Overall Width 61” (155 cm) - 52” Deck
72” (183 cm) - 61” Deck
Height 70” (178 cm) w/ Roll Bar Up
59” (150 cm) w/ Roll Bar Down
Weight (apx.) 1012 lbs (459 kg) - 52” Deck
1222 lbs (554 kg) - 61” Deck
Specifications
Not for
Reproduction