User`s guide

www.ti.com

MSP430 USB Silicon

2.4 USB Certification of the Silicon

To maintain a consistent user experience, it is important that USB devices adhere to compliance

standards. Much of this compliance is driven by the USB silicon and software. The MSP430 device

derivatives, running the USB API, have passed USB certification testing for all of the device classes that

they support. All certification was performed at MCCI, a test house approved by the USB Implementers

Forum (USB-IF).

An output of the USB certification process is a test ID, or TID. Table 2 shows the TIDs for all current

MSP430 silicon.

Table 2. MSP430 Device Test IDs (TIDs)

MSP430 Derivative Package TID

PT, RGC, RGZ (QFP, QFN) 40000973

MSP430F552x

ZQE (BGA) 40001139

PT, RGC, RGZ (QFP, QFN)

MSP430F550x, MSP430F5510 40001138

(Note: F5504 in RGZ is not included in this TID; see the next entry)

MSP430F5504 RGZ (QFN) 41001138

PZ (QFP) 40001250

MSP430F563x, MSP430F663x

ZQW (BGA) 40001442

PZ (QFP, QFN) 40001444

MSP430F565x, MSP430F665x

ZQW (BGA) 40001443

All MSP430 devices were certified under a vendor ID (VID) unique to the MSP430 MCU (0x2047),

separate from TI's main VID (0x0451).

SLAA457A–September 2013–Revised May 2014 Starting a USB Design Using MSP430™ MCUs

Submit Documentation Feedback