User`s guide

More Information

www.ti.com

FET target boards contain:

• A socket for the MSP430 device

• The minimum circuitry required for basic operation

• Two pushbuttons and an LED

• All of the MSP430 pins brought out to headers

• A USB connector

The FET target boards relevant to USB-equipped derivatives are shown at http://www.ti.com/msp430usb.

7 More Information

All of the tools and software described in this document can be found at the MSP430 USB landing page:

http://www.ti.com/msp430usb. Check periodically for updates. Information can also be found on the

product pages for individual devices.

For questions, go to http://www.ti.com/support for support options, particularly the TI Engineer-to-Engineer

(E2E) community (http://e2e.ti.com).

• MSP430x5xx and MSP430x6xx Family User's Guide (SLAU208). This document contains architectural

information common to the entire F5xx family.

• Individual device data sheets. These contain parametric and device-specific information.

• USB 2.0 specification (http://www.usb.org/developers/docs/)

• USB Field Firmware Updates on MSP430 MCUs (SLAA452)

• See http://www.ti.com/msp430usb for all things related to MSP430 USB.

Starting a USB Design Using MSP430™ MCUs SLAA457A–September 2013–Revised May 2014

Submit Documentation Feedback