SUPERMARKET ROBOTIC 4 H.P. Mfr's. No.
REAR FRAME ASSEMBLY ENGINE SUPPORT ASSEMBLY TINE ASSEMBLY FIGURE 2 ASSEMBLY A. Assemble rear frame assembly and mud scrapers to the engine support assembly with x 1* resews. (A, Fig. 2} B. Attach upper member of rear frame to the engine support assembly with x 1 1/4 screws, but do not tighten. {B, Fig. 2) C. Attach the right and left inner tine assemblies to the tine shaft by means of the drilled pins and spring clips.
CAR CAP SCREW FIGURE 3 CLUTCH LEVER CONTROL. PANEL CLUTCH LEVER {THROTTLE CABLE HANDLE COVERS /\ CLUTCH ROD FIGURE 4 OPERATION Before putting the Robotic into operation, make sure that the engine has been serviced completely as described in the engine instruction book provided. Thereafter, maintain the engine in accordance with the manual instructions, and make it a habit to never operate the tiller without first checking the engine crankcase oil level.
FRAME, HANDLES & CONTROLS PARTS LIST [Ret. | Part Ref.| Part No. No. Description No. No. Description A [118242 Body Assembly AK 705035 Hex Cap screw, x Ig. B |11824) Body Cover AL 720003 Lock Washer, 1/4" C 715040 Thumb Screw AM 1717005 Hex Nut, Full, D (718026 Speed Nut AN 1106558 Grip E j118208 Shaft Support AP 1118211 Clutch Handle Assembly F 708012 Hex Cap screw, x 5/8" ig.
TRANSMISSION & TINES PARTS LIST [Ret] part Fee Part . Ne.| No. Description No. No.
