Operator`s manual

3500 VRC Operator’s Manual

V5.00.26

October

2006

Revision M

Part No. : AM

3500V/M/SIMV5

Updated : 12/10/2006

Changing Trip Names

To make record keeping and operation more familiar and logical to the operator, existing trip

numbers 1-100 can be edited to reflect true field names or numbers.

Note

Trip names must be 6 characters long.

Editing Trip Names

1. Press “RECORDS” key to display records screen.

2. Use “<PREV” and “NEXT>” softkeys at bottom of screen to display trip number (1-100) to

change.

3. Press the “SELECT” softkey to activate trip name editing.

Note

?? The trip number will be highlighted ready for editing.

?? The trip will also be activated for data accumulation.

4. Use the left and right arrow keys to move the curser to the character to change.

5. Use the up and down arrow keys to change the character as required.

6. Repeat steps 4 – 6 to continue editing.

Tip

Holding down the up or down arrow key for one second will scroll the highlighted character

through all available letters and numbers.