Operator`s manual

3500 VRC Operator’s Manual

V5.00.26

October

2006

Revision M

Part No. : AM

3500V/M/SIMV5

Updated : 12/10/2006

Activate a New or Pre-Programmed Trip

1. Press the “RECORDS” key to display the current trip record.

2. Use bottom “<PREV” and “NEXT>” softkeys to display the required trip memory location.

3. Press the bottom “SELECT” softkey to engage the new trip memory.

Copy Products to a New Trip

1. Press “RECORDS” key to display current trip records.

2. Use “<PREV” “NEXT>” softkeys to display trip products to be copied.

3. Press “COPY” softkey to capture bin product selections, key will change to “PASTE”.

4. Use “<PREV” and “NEXT>” softkeys to display a clear (unused) trip memory location.

5. Press “PASTE” softkey to transfer bin products into new memory location.

6. Press ”SELECT” softkey to activate the new trip, for immediate, use otherwise the previously

engaged trip will be active.

Tip

Use the “COPY / PASTE” softkey to quickly insert existing bin setups into a new trip record.