Operator`s manual

3500 VRC Operator’s Manual
79
V5.00.26
October
2006
Revision M
Part No. : AM
-
3500V/M/SIMV5
Updated : 12/10/2006
7. Press "EXIT" softkey to return to the main screen. Once you are in the field pre-assigned rates
will be applied. If you are not in the field zero rates will be applied.
Turn off Auto Control
You can turn off automatic application to the map by pressing the “RESET” softkey at the bottom
left of the main screen.
Note
?? In the main screen when in auto control mode “AUTO” will be displayed under each active bin.
?? The rate displayed is the pre-assigned automatic rate.
?? The bottom left “RESET” softkey toggles “AUTO” on/off.
?? The map name will appear next to the memory indicator bar.
?? If the GPS signal drops out, auto-control will revert to the last rate prior to GPS drop out.
?? Changing auto-control from one map to another must be done through the “DATA CARD
MENU”. Each map must be selected separately.