Operator`s manual

3500 VRC Operator’s Manual
7
V5.00.26
October
2006
Revision M
Part No. : AM
-
3500V/M/SIMV5
Updated : 12/10/2006
Step 1
1.1 - Units Selection
To display quantities in US imperial units follow the steps below. Otherwise skip to “1.2 – Pod
Selection” on the next page.
Note
Default setting is units displayed in metric.
1.1.1 - Select US imperial
1. Press “CAL” key. The calibration menu appears.
2. Highlight “OPTIONS”.
3. Press the softkey pointing at “UNITS”.
4. Use the up and down arrow keys to toggle between “METRIC” and “US”.