Operator`s manual

3500 VRC Operator’s Manual

V5.00.26

October

2006

Revision M

Part No. : AM

3500V/M/SIMV5

Updated : 12/10/2006

Start Airseeding

1. Check all bins are ‘READY’ and target rates are correct.

2. Activate air seeder fan/s and check both (if applicable) fan rpm’s are above ‘low alarm’ point.

3. Press “RUN/HOLD” key to clear “UNIT ON HOLD” message. Or engage clutch.

4. If using “DEPTH HOLD” function, lower implement past the ‘hold’ point.

5. Press “PRIME” softkey to pre-start product metering (optional).

6. Accelerate to working speed, system will automatically assume control.