Operator`s manual

3500 VRC Operator’s Manual
70
V5.00.26
October
2006
Revision M
Part No. : AM
-
3500V/M/SIMV5
Updated : 12/10/2006
Critical Alarm Messages
Critical alarm messages related to the seeding operation, such as “BIN 1 RATE LOW” or “DRIVE 2
STOPPED” can not be silenced and must be rectified to cancel the alarm.
Refer to the list of alarm messages below.
Message Explanation
BAD VOLTAGE +12V supply voltage is low or fluctuating. Check power supply
and connections to power supply.
BIN 1
-
4 RATE 0
Bin rate has dropped to zero.
BLOCKAGE 1
BLOCKAGE 2
DEPTH HOLD Implement raised above hold point calibration.
DRIVE 1-4 SLOW Drive ratio too low or drive has stopped (slipping, wrong gear or
broken chain).
DRIVE 1-4 STOP Drive has stopped (broken belt or chain).
FAN STOPPED 1 Fan 1 stopped operating
FAN STOPPED 2 Fan 2 stopped operating
FAN SLOW 1 Fan 1 RPM below low alarm point.
FAN SLOW 2 Fan 2 RPM below low alarm point.
NO COMMS failed to establish communication with POD.
RAM ERROR Canlink internal memory error.