Operator`s manual

3500 VRC Operator’s Manual
68
V5.00.26
October
2006
Revision M
Part No. : AM
-
3500V/M/SIMV5
Updated : 12/10/2006
Message/Memory Display
Message
The message section displays an alarm message whenever an alarm condition is activated.
If two or more messages are activated at the same time, the display will cycle the messages, and
display the total number of messages in the que.
eg: 1/3 UNIT ON HOLD 2/3 BIN 1 LOW 3/3 FAN SLOW 1
Memory
If a data card is used, the memory bar indicates the size of the current log file on the card.
The maximum size of the log file is 2Mb. When the log file is 2Mb in size the memory indicator will
be full. To activate a new log file turn the canlink off and back on again.
When any monitored or controlled function of the airseeder is not operating correctly, an alarm
message will be displayed with an audible beep repeated every 5 seconds.