Operator`s manual

3500 VRC Operator’s Manual

V5.00.26

October

2006

Revision M

Part No. : AM

3500V/M/SIMV5

Updated : 12/10/2006

Alarm Key

Step through Messages

Press the “ALARM” key to step through the active messages.

Silence Non Critical Alarms

Press the “ALARM” key to silence non-critical alarms, such as the “BIN 1 RATE LOW” alarm.

Note

Critical alarms can not be silenced by pressing the “ALARM” key. The condition causing the alarm

must be rectified.

Cal Key

Is used to enter the calibration menu and calibration sub menus.

EXIT

ALARMS

DIAGNOSE

PRODUCT

AUTOSTEER

MACHINE

DISPLAY

DATA CARD

CLOCK/GPS

SETUP

GUIDANCE

OPTIONS

CAL

Press CAL to enter

calibration menu

VRC 1.00.15B/5.00.07

RATES

calibration menu

Note

The left hand side softkeys are used in the calibration screens to highlight values. And the right

hand side arrow keys are used to change values.